Parasound

Parasound Halo HINT 6 Integrated Amplifier

$3,999.00
Earn 3999 Rewards Points for this purchase
Free shipping to contiguous US
Tax calculated at checkout
Sale Alert



 


Current stock: 0

Parasound Halo HINT 6 Integrated Amplifier Key Features:

  • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
  • Power amp circuit topology designed by legendary John Curl
  • ESS Sabre32 Reference DAC (ES9018K2M)
  • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
  • Phono input for MM, MC and MI with 100 Ω or 47k Ω load
  • Dedicated high current headphone amplifier (TI TPA6120)
  • Front panel Aux input with automatic +12 dB gain stage

Product Description: 

The HINT 6, Parasound's newly engineered high-performance Integrated Amplifier, is the latest evolution in their lineup. Nicknamed "HINT," it takes over from the original Halo Integrated, a product that garnered widespread acclaim and enthusiastic reviews for its exceptional sound quality. Critics have praised it as "downright sumptuous," highlighting its unbeatable value for money, affordability, and astonishing performance. The Halo Integrated was even distinguished as a Class A Recommended Component by Stereophile, standing out among fourteen integrated amplifiers whose average retail prices were significantly higher.

The HINT 6 sets a new standard in high-end integrated amplifiers with its powerful, musical, and extraordinarily versatile performance. It represents an unmatched combination of exquisite performance and outstanding value, redefining expectations for integrated amplifiers. The volume control of the HINT 6 is particularly noteworthy, featuring a new dimmable display that shows the precise volume level. Users can personalize settings, including the turn-on volume and a favorite volume level. The amplifier's volume knob, crafted from solid machined aluminum, is polished at the front and textured around its perimeter, ensuring rock-solid and smooth operation thanks to its ball-bearing mechanism.

Specifications:

Preamp and DAC Specifications

  • ESS Sabre32 Reference DAC (ES9018K2M)
  • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
  • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
  • Coax and optical inputs accept PCM up to 192kHz/24-bit
  • Analog bass management with high & low pass crossovers
  • Home theater bypass input for surround sound integration
  • Front panel subwoofer level control
  • Dedicated high current headphone amplifier (TI TPA6120)
  • Phono input for MM, MC and MI with 100 Ω or 47k Ω load
  • Front panel Aux input with automatic +12 dB gain stage
  • 5 pairs RCA line level Analog inputs
  • 1 pair XLR balanced Analog input
  • Balanced XLR and RCA left and right preamp outputs
  • 1 balanced XLR and 2 RCA subwoofer outputs
  • Bass & treble controls with relay bypass from remote or front panel
  • Rear panel IR input and IR loop output jacks
  • 12 Volt trigger output
  • Back-lit remote control with discrete buttons
  • 0.5w standby power consumption meets Energy Star & EU specs

Power Amp Specifications

  • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
  • 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
  • Power amp circuit topology designed by legendary John Curl
  • Direct amplifier input to bypass preamp section
  • High bias class A/AB operation
  • Oversized shielded toroid power transformer
  • Dual-mono power supply and power amplifier
  • 40,000uF power supply filter capacitance
  • Matched JFET input stages and MOSFET driver stages
  • 12 high voltage/high current bipolar output transistors
  • Heavy-duty 24k gold-plated 5-way speaker binding posts
  • Over temp and short circuit relay protection

New Features (Changes from the original Halo Integrated)

  • Burr Brown analog resistor ladder volume control
  • Dimmable front panel volume display
  • Updated USB receiver is Plug and play with Windows 10 and MAC
  • An additional optical input (2 total)
  • Ball bearing supported solid aluminum volume knob
  • Programable default turn on volume setting
  • Favorite volume memory with remote control button
  • Increased phono stage gain for lower output cartridges
  • Improved Left/Right channel separation and balance tracking
  • Updated cosmetics with subtle gold highlights

General

Power Output - (0.9% THD)
(Both channels driven, 20 Hz - 20 kHz)
180 watts x 2 @ 8 Ω RMS
270 watts x 2 @ 4 Ω RMS

Power Output - (0.05% THD)
(Both channels driven, Thank 20 Hz - 20 kHz)
160 watts x 2 @ 8 Ω RMS
240 watts x 2 @ 4 Ω RMS

Current Capacity
45 amps peak per channel

Frequency Response
10 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.5 dB

Total Harmonic Distortion (THD)
< 0.01 %, average listening levels
< 0.05 %, 160 watts x 2 @ 8 Ω

Interchannel Crosstalk
> 70 dB at 20 kHz
> 78 dB at 1 kHz

Signal to Noise Ratio - IHF A-weighted
Line in: - 103 dB (input shorted)
Digital in: - 106 dB

Amplifier Damping Factor
> 800 at 20 Hz

Preamplifier Stage Input Sensitivity
300 mV in for 1 V at Preamp Output jacks
Total Preamp Stage Gain: 10 dB
Max Output Unbalanced: 7 V
Max Output Balanced: 9 V

Power Amplifier Stage Sensitivity
1 V at Bypass/Amp In for 28 V at Speaker Out
Total Amp Stage Gain: 28 dB

Phono Stage Sensitivity / Input Impedance
MM: 41 dB / 47 k Ω
MC: 54 dB / 47 k Ω or 100 Ω

High & Low Pass Crossover Slope
12 dB per octave

Supported DAC Sampling Rates
USB: up to 384 kHz / 32-bit PCM
DSD Native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384 kHz

Coax/Optical: up to 192 kHz / 24-bit PCM

Digital to Analog Converter
ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit

USB 2.0 Controller
Savitech SA9227, 384 kHz / 32-bit

Headphone Amplifier
Texas Instruments TPA6120A
Output Impedance 10 ohms

XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Input Impedance
Unbalanced: 24 k Ω
Balanced: 100 k Ω per leg

Preamplifier Output Impedance
Unbalanced: 100 Ω
Balanced: 470 Ω per leg

Dimensions
Width: 17-1/4" (437 mm)
Depth: 16-1/4" (413 mm)
Depth, with cables 17-1/4" (437 mm)
Height, with feet: 5-7/8" (150 mm)
Height, without feet: 5-1/4" (133 mm), 3U

Net Weight
33 lb. (15 kg)

Shipping Weight
45 lb. (20.4 kg)

Power Requirement
Standby: 0.5 watts
Idling power: 70 watts
Maximum: 750 watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz
AC mains voltage is set on rear panel

Link to Manual