Rotel RB-956AX 6/5/4/3 Channel Bridgeable Stereo Power Amplifier

This amplifier is in excellent operational condition. All 6 channels working perfectly with no issues. Cosmetic condition is very good as well aside from a little dust inside. Exterior is free of any notable blemishes. Original instruction manual IS included but is not pictured.

See photos for details.

Specs below:
Rotel Rb 956ax 6 channel amp in excellent condition. It puts out 30w x 6 or bridge 3 x 90w. SPECIFICATIONS Continuous power output: 30 watts* per channel, min. RMS both channels driven into 8 ohms from 20 to 20.000 Hz with no more than 0.03% THD. DIN Output: 50 watts per channel (1kHz, 4 ohms, 1% THD) Peak Current: 20A (0.1 ohms, 10 usec, 1 pulse) Power Output (BTL): 90 watts (bridged) min. RMS driven into 8 ohms from 20 to 20.000Hz with no more than 0.03%THD. Total Harmonic Distortion (THD): No more than 0.03% (continuous rated power output). (20 to 20.000Hz): No more than 0.03% (continuous 1/2 rated power output). No more than 0.05% (1 watt per channel power output, 8 ohms). Intermodulation Distortion: No more than 0.05% (continuous rated power output). (60 Hz: 7kHz = 4:1) No more than 0.05% (continuous 1/2 rated power output). No more than 0.05% (1 watt per channel power output, 8 ohms). Output (Speakers): 8 ohms min (bdrigded mode); 4-16 ohms (stereo mode) Damping factor: 180 (20 to 20.000 Hz, 8 ohms) Input sensitivity/Impedance: 1.0V/27 kohms Overload Level (THD 0.5%, 1kHz): 5V Frequency Response: 10 to 80.000 Hz, 01 dB, -1.0 dB Signal to Noise Ratio (IHF, A network): 105 dB GENERAL Power Requirement: 120 V/60 Hz, 230-240 V/50 Hz (depending on destination) Power Consumption: 400 watts Dimension (overall): 440 (W) x 92 (H) x 396 (D) mm Weight (net): 10.5 kg/23.1 lbs