
Phoenix Gold Xenon x100.4 100W x 4 Car Amplifier
Current stock:
0
This amplifier is in excellent condition both functionally and cosmetically. It is working perfectly and shows minimal signs of wear. See photos for details of condition and what is included.
Specifications
- RMS: Root Mean Square is a formula that provides a reasonably accurate means of measuring and comparing continuous AC power. The use of this measure is preferred when matching system components, like amplifiers and receivers.">RMS Power Range : 100-200 Watts
- Number Of Channels: Common name for a complete amplifying stage in any audio amplifier. Most amplifiers are denominated as 1, 2, 4, 5, or 6 channel units. Each of these is a discrete audio amp on its own, capable of taking a small line signal input and amplifying it sufficiently to be heard on an appropriate speaker. Some amplifiers are capable of bridging two channels together, to form one channel of double the power of each separately. The manufacturers instructions differ widely on how to accomplish this, and each must be followed exactly.">Number Of Channels: 4
- Frequency Response: The range of frequencies that a speaker will reproduce (lowest frequency to the highest). While the optimal normal is 20 - 20,000 Hz (Hertz), the range of human hearing for individuals is often much more restricted. A good full-range speaker system however, will reproduce as much of this range as possible in order to cover all variations. Individual Drivers are limited to reproducing only that part of the spectrum for which they were made, so their response will be limited, but still a necessary point to consider when designing a complete sound system.">Low Frequency response: 20 Hz
- Frequency Response: The range of frequencies that a speaker will reproduce (lowest frequency to the highest). While the optimal normal is 20 - 20,000 Hz (Hertz), the range of human hearing for individuals is often much more restricted. A good full-range speaker system however, will reproduce as much of this range as possible in order to cover all variations. Individual Drivers are limited to reproducing only that part of the spectrum for which they were made, so their response will be limited, but still a necessary point to consider when designing a complete sound system.">High Frequency Response: 20000 Hz
- Crossover: A device or passive circuit used in systems with separate tweeter and/or midrange Drivers. It Rolls Off frequencies above and below certain points in the range, to allow the sound to be tailored for the specific driver to which it is sent. Most speakers have crossovers that consist of passive elements such as capacitors, coils, and resistors to separate the various frequencies. In a bi-amped or multi-amped system, the crossover is an active device that feeds the various frequency bands to the inputs of the amplifiers that operate the individual drivers.">Built In Crossovers: Yes
- Channel Separation: Refers to an amplifier’s capability to filter noise or interference between multiple channels.">Channel Separation: Yes
Features
- RMS Power @ 4 Ohms: 100W x 4 @ 14.4V
- Bridged RMS Power @ 4 Ohms: 200W x 2 @ 14.4V
- Signal to Noise Ratio: > 100 dB
- Bass Boost: 0 - 18 dB
- XeTUNE- Advanced input and signal processing circuitry
- Top-Mounted Controls
- 24 dB / Octave Crossover
- Twin-T Variable 0 - 18 dB Bass Boost at 45 Hz
- Auxiliary Outputs Route Full Range Signals
- Tri-Linear Capability Allows Simultaneous Stereo and Bridged Operation
- XeFlow- Thermal feedback system with output optimization
- Bottom-Mounted Extruded Aluminum Heatsink
- Expanded Metal Mesh Intake & Exhaust Vents
- Ultra-Quiet Variable Speed Fan
- Temperature Monitoring with Automatic Output Optimization
- Superbrite 5mm LED Power Indicator
- XeLOAD- Full power with automatic load sensing
- Load Sensing Optimizes Power Supply and Output Stage
- Maximum Power Output From 1 - 4 Ohms Stereo or 2 - 8 Ohms Bridged
- High-Current Triple Darlington Output Stage
- 150-Volt, 15-Amp, 60 Mhz Sanken Output Transistors
- Direct Insert Speaker Terminals Accept Up To 8 Gauge Wire
- 4 Gauge Power Terminals with Removable Rubber Grommets
- Dimensions: 18.25 W x 10.6 L x 2.5 H
Related Products
