Parasound HCA-2200 ii Stereo Power Amplifier; Rare 230v European Version

This amplifier is in perfect working order. We tested using a step up transformer (which we can include in the sale if needed). It sounds fantastic. A copy of the owner's manual is included.

Cosmetic condition is very good overall. However, there are a couple of abrasions on the face. See photos for details.

This amplifier is set to 230v operation. Great amp if you are planning to travel overseas. Of course, affordable, secure worldwide shipping available. Please request and exact quote prior to purchase.

FEATURES

• Two independent 1200vA toroid power transformers
• Independent transformer windings for driver stage regulators
• Higher driver rail voltages and independent regulation to prevent sag
• 100,000uF computer-grade capacitors in power supply
• Multiple polystyrene bypass capacitors in power supply
• Cascode Class A input stages with matched J-FET pairs
• Hand picked Mosfets in high voltage driver stages
• 24 5OMhz, 15 ampere output transistors, B-matched complements
• Output transistors direct-coupled without inductors
• DC servo direct-coupled audio circuits with 0.3Hz rolloff
• Linear tracking, instantaneous acting DC servos
• Pure Class A operation up to >6 watts output; Class AB-1 thereafter
• Balanced input circuits, XLR connectors, separately switched
• Gold-plated metal structure RCA input jacks
• Multiple temperature sensors and silver-cadmium relay protection
• FR-4 glass epoxy circuit boards, outputs double clad for high current
• Dual mono circuit topology for superior separation past 20kHz
• Proprietary quick-settling bias circuits obviates warmup period
• Silver plated audiophile-grade wiring drivers to outputs
• Precision 1% tolerance Holco and Resista metal film resistors

SPECIFICATIONS

• Continuous Power Output - Stereo
  250 watts RMS x 2, 20 Hz-20 kHz, 8 Ω
  385 watts RMS x 2, 20 Hz-20 kHz, 4 Ω
  385 watts RMS x 2, 20 Hz-20 kHz, 2 Ω
• Continuous Power Output - Mono
  750 watts RMS, 20 Hz-20 kHz, 8 Ω
  1000 watts RMS, 20 Hz-20 kHz, 4 Ω
• Current Capacity
  50 amperes continuous
  90 amperes peak
• Slew Rate
  >135 V/µsecond
• Frequency Response
  2 Hz-95 kHz, +0/-1.5 dB
• Total Harmonic Distortion
  < 0.05% at full power
  < 0.009% typical levels
• IM Distortion
  < 0.03%
• TIM
  Unmeasureable
• Dynamic Headroom
  > 1.5dB
• lnterchannel Crosstalk
  > 84 dB at 1 kHz
  > 74 dB at 20 kHz
• Input Impedance
  100K Ω/RCA-unbalanced, 200K Ω/XLR-balanced
• S/N Ratio
  > 114 dB, input shorted, IHF A weighted
• Damping Factor
  > 1000 at 20 Hz
• Dimensions
  19" wide x 7" high x 15" deep
• Weight
  60 lbs. net
• AC Power Requirements
  1000 watts