Speak to a HiFi Guide • 1-888-326-7490 • Mon-Fri • 8am to 5pm MST
Kenwood KA-8100 Vintage Stereo Integrated Amplifier
Current stock:
0
This amplifier is in excellent working condition with no issues. I am listening to it as I write this... very impressive performance. Does not seem to be lacking in power for even large floorstanding speakers.
Cosmetic condition is very good overall. There are a few small nicks around the edges of the faceplate and a couple of very tiny nicks on the face as well. None of this is very noticeable - from 4-5 feet away, it looks brand new - very attractive overall. See photos for details.
| | POWER section |
| Power : | 2x 75W (RMS, 8 Ohm, 20Hz...20Khz) |
| 2x 90W (1Khz, 4 Ohm) | |
| Dynamic output : | 330W (4 Ohm) |
| THD : | 0,03% (rated power, 8 Ohm) |
| 0,01% (1W, 8 Ohm) | |
| Power bandwidth : | 5Hz...50Khz |
| Frequency response : | DC...100Khz (+0 / -1,5dB) |
| S/N ratio : | 115dB |
| Damping factor : | 50 at 8 Ohm |
| Input : | 1V / 50kOhm |
| Speakers : | 4...16 Ohm |
| | PREAMP section |
| Inputs : | 2,5mV / 50kOhm (Phono 1&2) |
| 150mV / 50kOhm (lines) | |
| S/N ratio : | 85dB (2,5mV input, Phono) |
| 91dB (5mV input, Phono) | |
| 97dB (10mV input, Phono) | |
| 110dB (2,5mV input, lines) | |
| Max. input : | 250mV (Phono 1, 0,02% THD, 1Khz) |
| Outputs : | 150mV / 220 Ohm (tape RCA) |
| 30mV / 80kOhm (tape DIN) | |
| 1V / 470 Ohm (preamp) | |
| Frequency response : | ± 0,2dB RIAA |
| 7Hz...50Khz (lines, +0/-1dB) | |
| Bass control : | ± 7,5dB at 50Hz (turn. 150Hz) |
| ± 7,5dB at 100Hz (turn. 400Hz) | |
| Treble control : | ± 7,5dB at 10Khz (turn. 3Khz) |
| ± 7,5dB at 20Khz (turn. 6Khz) | |
| Loudness control #1 : | +3/+6/+9dB at 50Hz |
| Loudness control #2 : | +3/+6/+9dB at 100Hz |
| Gain control : | +10 / 0 / -10dB |
| Subsonic filter : | 18Hz, 6dB/octave |
| Low filter : | 40Hz 12dB/ocatve |
| High filter : | 8Khz 12dB/octave |
| | General |
| PC : | 600W (full power) |
| Dimensions : | 43 x 14,9 x 38,4cm |
| Weight : | 14,5kg. |