Tributaries Series 6 Power Cable

Tributaries Series 6 Power Cable Key Features:

• Assembled by hand with foreign and domestic parts in Orlando Florida, USA
• 3-Pole 15Amp Straight IEC > Straight AC power cable
• Large 14AWG HC-OFC wires don’t starve power amps of power
• Multi-gauge geometry design is optimized for low frequency AC signals of 50/60Hz
• Propriety winding techniques & triple shielding ensure low noise transfer
• PVC dielectrics isolate vibration from alternating current from entering the signal path.
• Non-magnetic nylon power connectors are both durable and light-weight
• Decorative woven jacket over Rugged black PVC jacket

Product Description: 

All Series 6 audio cables are meticulously assembled by hand in Orlando, Florida. The 6P-IEC is a shielded 3-pole grounded power cable engineered with 14AWG conductors that ensure power amplifiers receive ample current without restriction. Designed exclusively for Tributaries by Jay Victor, these cables are optimized for low-frequency 50/60Hz signals, with conductor sizes and gauge combinations specifically selected for this purpose.

The Series 6 cables begin with multi-gauge solid High Conductivity Oxygen-Free Copper (HC-OFC), developed specifically for audio applications. Each conductor is insulated with PVC dielectric material, chosen to isolate vibrations caused by alternating current and prevent them from entering the signal path. To maximize noise reduction, the cable utilizes alternating lays in its twisting process. This method cancels out magnetic fields created by the twisting of insulated conductors, thereby eliminating distortion. The 6P cable is also triple-shielded, providing protection from RF and EMI noise, which results in audible improvements by lowering the noise floor, allowing more information to be heard and seen.

For termination, the Series 6 power cable conductors are prepared by stripping the PE insulation while maintaining the original twist, and then dipped in a high-temperature solder pot. This process bonds the wires into a single conductor, which is then terminated in a lightweight nylon power connector. This construction reduces transmission resistance and improves signal flow.

The Series 6 Power cable is available in lengths of 3 feet, 6 feet, and 9 feet, with custom lengths also available.

Warranty:

Lifetime Limited Warranty, click here for full warranty information.