Pure Fidelity Allegro Turntable
FREE shipping to contiguous US
FREE store pickup at TMR Erie, CO.
Earn 11,495 TMR Rewards points for this purchase.
Not a member? Join today >
FREE
Shipping
Financing
Available
Trade Up
& Save
Full
Warranty
60-Day
Returns
Lifetime Tech
Support
Free Shipping & Safe Delivery Guaranteed
All new products ship free within the contiguous United States.
Every order is backed by our TMR Safe Pack & Ship Guarantee. We carefully double-box every shipment to protect the manufacturer's packaging, and larger items are professionally packed and palletized when required for safe, upright delivery.
Every shipment is fully insured, with signature confirmation required on orders over $750.
In the rare event of loss or damage, we fully protect your purchase and handle the resolution for you.
We DO NOT offer international shipping.
60-Day Risk-Free Returns
We want you to feel confident investing in new HiFi. That’s why all new products come with 60-day risk-free returns, giving you time to listen, evaluate, and make sure it’s the right fit for your system.
Full Manufacturer Warranty
Every new product is backed by its full manufacturer warranty, giving you long-term peace of mind and direct support from the brand—on top of TMR’s expert guidance and customer care.
About Pure Fidelity Allegro Turntable
Lively by name. Unhurried by nature.
In music, allegro marks a lively, quick tempo. We gave the name to a turntable that carries as much of our flagship, the Symphony, as we could bring into a smaller footprint: its 75-millimetre Ultra MDF plinth, its 60-millimetre Delrin platter and thicker sub-platter, its large-profile GAIA IV footers, its stainless steel armboard, and its Conductor SE. The teardrop shape is the Allegro’s own.
A teardrop has no straight edge to follow, so it needs a veneer with no single direction: a figure that reads the same whichever way the light falls. Every veneer is chosen by hand and cut from the sheet with a template, so no knot, split or flaw reaches the finished plinth.
75-mm Ultra MDF plinth.
Cut from Ultra MDF, sourced in the United States from one of very few makers of it. It is extremely dense and close to resonance-free, and, unlike solid wood, it does not swell, shrink or twist with the humidity of a room. Nor does it vary from board to board, so every Allegro sounds the same, while no two look alike.
Veneered by hand. Finished by machine.
Each veneer is laid by hand, and the plinth is then machined on CNC to its exact form.
Large-profile GAIA IV footers.
Four large-profile GAIA IV footers, developed with IsoAcoustics for our turntables, with a wide contact on the surface beneath, keep the shelf’s vibration out of the record.
Ruby bearing in bronze.
A ruby ball, rated 9 on the Mohs scale of hardness, one step below diamond, turns in a well of bronze. Bronze is harder than the brass most makers use, with a lower coefficient of friction. With a stainless steel shaft on a sub-platter of aluminum and stainless steel, three hard materials meet with very little friction between them. Less friction means less noise. Less noise means more music.
60-mm Delrin platter.
Its mass acts as a flywheel: once the record is up to speed, it stays there, and the platter stands between the record and the vibration around it. Delrin behaves much like vinyl itself, so the platter does not ring, and the record needs no mat.
A motor chosen first.
A custom three-watt, 12 V AC synchronous motor, made for us in the Netherlands specifically for turntables, drives the platter through dual belts. It is small and gentle by design, and close to silent. Pure Fidelity tables are known as some of the quietest in the industry, and this pairing of motor and controller is a large part of why.
The Conductor SE.
The motor was chosen before its controller was designed, so the Conductor SE is built around it. Its quartz-locked processor holds 33⅓ and 45 rpm to within ±0.003%, and its 35-watt transformer gives the drive far more in reserve than the motor draws. Designed and built in British Columbia, and set to speed on our bench before it ships.
Stainless steel armboard.
A tall armboard in stainless steel, dense and rigid, so that the only thing moving is the stylus in the groove. It takes any nine-inch tonearm.
Specifications
| Drive | Belt drive, dual belts; custom 3-watt, 12 V AC synchronous motor, made in the Netherlands |
| Speed Control | Conductor SE quartz lock, ±0.003%; 33⅓ and 45 rpm |
| Plinth | 75-mm Ultra MDF, hand-laid veneer, teardrop form |
| Platter | 60-mm Delrin on a thicker aluminum and stainless steel sub-platter |
| Bearing | Ruby ball bearing in a bronze bearing well |
| Armboard | Stainless steel, for 9-inch tonearms |
| Tonearm | Zephyr Mk5, Illustrious SE, Savant Ti, Enterprise MkV or PU-8; or the table alone |
| Isolation | Four large-profile IsoAcoustics GAIA IV footers |
| Record Isolator | SS-10 stainless steel |
| Dimensions | 16.9" W × 14.5" D (429 × 368 mm) |
| Weight | 32 lbs / 14.5 kg |
